Chevrolet Equinox Service Manual: Wheel Alignment Specifications Wheels
Alignment Condition: Full tank of fuel, no passengers and placed on flat level surface.
None | Front | 2.7° | 2.7° | 0.0° | −0.5° | −0.5° | 0.0° | 0.2° | 0.0° | — |
Rear | — | — | — | −0.4° | −0.4° | — | 0.1° | — | 0.0° |
Tire Terminology and Definitions Wheels
Air Pressure The amount of air inside the tire pressing outward on each square inch of the tire.Air pressure is expressed in kPa (kilopascal) or psi (pounds per square inch).Accessory Weight The combi ...
Tire and Wheel Balancing (Road Force Variation (RFV)) Wheels
ALL wheel/tire assemblies must have a RFV within spec beforebeing mounted on vehicle.Important:If a wheel/tire assembly is not within the RFV specificationafter match mounting, the tire must be return ...
Other materials:
Camshaft Timing Chain, Sprocket, and Tensioner Installation (LAF, LEA, or LUK) Valvetrain Valvetrain Timing
Special ToolsEN-45027 Tensioner ToolEN 45059 Angle MeterEN-48953 Camshaft Actuator Locking ToolFor equivalent regional tools, refer toSpecial Tools.Note:The engine is timed top-dead center exhaust stroke.Ensure the intake camshaft notch is in the 10-o'clock position-(2) and the exhaustcamshaft notch ...
