Chevrolet Equinox Service Manual: Sunroof Motor/Actuator Initialization/Teach Process Moonroof/Sunroof Power Moonroof Motor and Cables

Chevrolet Equinox Service Manual / Body / "Roof - Fixed, Leisure" / Sunroof Motor/Actuator Initialization/Teach Process Moonroof/Sunroof Power Moonroof Motor and Cables

Note:If the sunroof motor is new, cycle the sunroofseven-(7) times to teach the motor/actuatorinitialization process.

Perform the initialization/teach process on a new orreinstalled motor as follows:Ensure that the headliner electrical harness is connected tothe sunroof motor.Put the vehicle Park Brake On.Ensure that the vehicle is in Park.Engine running.

Note:If the sunroof window doesn't go to the vent open positionfirst time, release the switch and press the switch again.

Press and hold the sunroof switch to the vent open positionuntil the sunroof window stops in the vent open position.Again press and hold the sunroof switch to the vent openposition for at least 10 seconds, then the window should moveslightly.Verify the sunroof operation.

If the initialization/teach procedure is not carried outcompletely, it has to be started again.

Sunroof Track Timing/Synchronization Moonroof/Sunroof

It is only necessary to lower the headliner. Only do thosesteps in the headliner replacement procedure that will lower theheadliner enough to gain access to the part. Refer toHeadlining Trim Panel Rep ...

Sunroof Frame Replacement Moonroof/Sunroof

Removal ProcedureIt is only necessary to lower the headliner. Only do thosestep in headliner replacement that will lower the headliner enoughto gain access to the part. Refer toHeadlining Trim Panel R ...

Other materials:

Hood Ajar Indicator Description and Operation Panels
Hood Ajar SwitchThe body control module (BCM) applies B+ to the hood ajarsignal circuit and monitors the voltage to determine the positionof the hood. When the hood is closed, the switch is open andvoltage remains high. When the hood is open, the switch is closedand the voltage is pulled low.The BCM ...