Warning:After deployment, the metal surfaces of the SIR component maybe very hot. To help avoid a fire or personal injury:
Allow sufficient time for cooling before touching any metalsurface of the SIR component.Do not place the deployed SIR component near any flammableobjects.
SIR Identification Views Secondary
SIR Inflator Module Disposal Warning SecondaryLower Control Arm Ball Joint Replacement Suspension Ball Joints
Removal ProcedureRemove the lower control arm. Refer toLower Control Arm Replacement.Place the lower control arm in a vise or suitable holding device.Remove the ball joint rivets using the following procedure.Drill through the rivets using an 8-mm (5/16-in) drill bit.Enlarge the hole using a 12-mm ( ...