Warning:In order to prevent accidental deployment and the risk ofpersonal injury, do not dispose of an undeployed inflator module asnormal shop waste. Undeployed inflator modules contain substancesthat could cause severe illness or personal injury if their sealedcontainers are damaged during disposal. Use the followingdeployment procedures to safely dispose of an undeployed inflatormodule. Failure to observe the following disposal methods may be aviolation of federal, state, or local laws.
SIR Deployed Inflator Modules Are Hot Warning Secondary
Repairs and Inspections Required After a Collision Primary Seat BeltsOil Pan Installation Engine Lubrication Oil Sump/Pan
Place a 3-mm (0.118-in) bead of RTVsealant on the block pan rail and the crankshaft rear oil sealhousing-(1). Refer toAdhesives, Fluids, Lubricants, and Sealersfor recommendedsealant.Position the oil pan-(1) onto the block.Loosely install the oil pan bolts-(1)and-(2).Caution:Refer toFastener Caution ...