Warning:Halogen bulbs contain gas under pressure. Handling a bulbimproperly could cause it to shatter into flying glass fragments.To help avoid personal injury:
Turn off the lamp switch and allow the bulb to cool beforechanging the bulb.Leave the lamp switch OFF until the bulb change iscomplete.Always wear eye protection when changing a halogenbulb.Handle the bulb only by its base. Avoid touching theglass.Keep dirt and moisture off the bulb.Properly dispose of the used bulb.Keep halogen bulbs out of the reach of children.
Turn Signal Switch Bracket Replacement Lighting Exterior Lighting Turn Signal and Hazard Lamps
Halogen Bulbs Lighting BulbsTransmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection Automatic Transmission Unit
Removal ProcedureImportant:Perform the following procedure when removing the retainingrings and cooler lines from the quick connect fittings located onthe radiator and/or the transmission.Pull the plastic cap back from the quick connect fitting anddown along the cooler line about 5-cm(2-in).Using a ...