Anytime a TPM sensor is reused – the valve stem must be replaced.For snap - fit TPM stems, stems do not come pre - lubed. Apply tire lubricant, refertoAdhesives, Fluids, Lubricants, and Sealersto the stem and install immediately.For clamp fit TPM stems, use lock nut and torque, refer toFastener Tightening Specifications.
Torque Tube Input Flange Runout Measurement
Special ToolsGE-7872Magnetic Base Dial Indicator Set, or equivalentNote:This measurement procedure is intended to measure torque tuberunout for systems with a constant velocity (CV) joint, rubbercoupling or bolt-on U-joint yoke at the torque tube.Place the transmission in NEUTRAL.Raise and support t ...