
| Preliminary ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assemblies. Refer toTire and Wheel Removal and Installation.Remove the left side engine splash shield. Refer toEngine Splash Shield Replacement - Left Side.Disconnect the steering linkage outer tie rods from the steering knuckles. Refer toSteering Linkage Outer Tie Rod Inspection.Disconnect the stabilizer shaft links from the stabilizer shaft. Refer toStabilizer Shaft Link Replacement. | |
1 | Stabilizer Shaft ProcedureRemove the stabilizer shaft insulators. Refer toStabilizer Shaft Insulator Replacement.Remove the stabilizer shaft through the left wheel opening. |
Stabilizer Shaft Replacement Sway Bar Assembly
General DescriptionNeutral - Engine Running (Gen 2/Hybrid) Automatic Transmission Unit
When the gear selector is moved to the Neutral (N) position,the hydraulic and electrical system operation is identical to Park(P) range. However, if Neutral is selected after the vehicle wasoperating in Reverse (R), the normally-low 35R pressure controlsolenoid is commanded OFF and the following cha ...