Caution:Removing more than 0.5-mils of the clearcoat canresult in early paint failure. The clearcoat contains ultravioletscreeners. Do not finesse sand more than what is required to removethe defect.
Valve Lifter Priming Caution
Component Fastener Tightening CautionLower Control Arm Ball Joint Replacement Suspension Ball Joints
Removal ProcedureRemove the lower control arm. Refer toLower Control Arm Replacement.Place the lower control arm in a vise or suitable holding device.Remove the ball joint rivets using the following procedure.Drill through the rivets using an 8-mm (5/16-in) drill bit.Enlarge the hole using a 12-mm ( ...