Warning:When you are doing this inspection, the vehicle could movesuddenly. If the vehicle moves, you or others could beinjured.
Before starting this check, be sure there is enough room around the vehicle. It shouldbe parked on a level surface.Apply the parking brake. Be ready to apply the regular brake immediately if the vehiclebegins to move.With the engine off, turn the ignition on, but do not start the engine. Without applyingthe regular brake, try to move the shift lever out of P-(Park) with normal effort.If the shift lever moves out of P-(Park), contact your dealer for service.
Fuel Pressure Relief Engine Control
DrivelineCrankshaft and Bearing Installation Engine Block Cylinder Block Crankshaft
Special ToolsGE 6125-1B Slide Hammer AdapterEN 45059 Angle MeterEN 49102 Crankshaft Bearing Cap RemoverFor equivalent regional tools, refer toSpecial Tools.Crankshaft Bearing Installation ProcedureNote:If the crankshaft bearings have been used in a running engine, you must replace themwith NEW crank ...