Chevrolet Equinox Owners Manual: Park Brake and P (Park) Mechanism Check
| Warning
When you are doing this check,
the vehicle could begin to move. You or others could be injured and property could be damaged. Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move. |
Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
- To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only.
- To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake.
Contact your dealer if service is required.
Automatic Transmission Shift
Lock Control Function
Check
Warning
When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.
Before starting this check, be
sure ...
Wiper Blade Replacement
Windshield wiper blades should be
inspected for wear and cracking.
See Maintenance Schedule.
Replacement blades come in
different types and are removed in
different ways. For proper type and
...
Other materials:
Brake Pedal Pushrod Inspection Hydraulic Brakes Brake Pedal Assembly
Disconnect the brake pedal pushrod-(1) from thebrake pedal.Inspect the brake pedal pushrod eyeletbushing-(2), if equipped, for cracks and/or excessivewear.Reposition the pedal pushrod boot-(3) toward thefront of the vehicle to expose as much of the pedalpushrod-(1) as possible.Inspect the brake peda ...
