Chevrolet Equinox Owners Manual: Navigation
OnStar navigation requires a specific OnStar service plan.
Press 
to receive Turn-by-Turn
directions or have them sent to the
vehicle's navigation screen,
if equipped.
Turn-by-Turn Navigation
- Press
to connect to
an
Advisor. - Request directions to be downloaded to the vehicle.
- Follow the voice-guided commands.
Using Voice Commands During a Planned Route
Cancel Route
- Press
. System responds:
"OnStar ready," then a tone. - Say "Cancel route." System responds: "Do you want to cancel directions?"
- Say "Yes." System responds: "OK, request completed, thank you, goodbye."
Route Preview
- Press
. System
responds:
"OnStar ready," then a tone. - Say "Route preview." System responds with the next three maneuvers.
Repeat
- Press
. System
responds:
"OnStar ready," then a tone. - Say "Repeat." System responds with the last direction given, then responds with "OnStar ready," then a tone.
Get My Destination
- Press
. System
responds:
"OnStar ready," then a tone. - Say "Get my destination." System responds with the address and distance to the destination, then responds with "OnStar ready," then a tone.
Send Destination to Vehicle
Subscribers can have directions sent to the vehicle's navigation screen, if equipped.
Press 
, then ask the Advisor to
download directions to the vehicle's
navigation system, if equipped. After
the call ends, the navigation screen
will provide prompts to begin driving
directions. Routes that are sent to
the navigation screen can only be
canceled through the navigation
system.
See www.onstar.com (U.S.) or www.onstar.ca (Canada).
Security
If equipped, OnStar provides these
services:
With Stolen Vehicle Assistance,
OnStar Advisors can use GPS to
pinpoint the vehicle and help
authorities quickly recover it.
With ...
Connections
The following OnStar services help
with staying connected.
For coverage maps, see
www.onstar.com (U.S.) or
www.onstar.ca (Canada).
Ensuring Security
Change the default passwords
for ...
Other materials:
Fuel Pressure Sensor Replacement Engine Control Engine Control Sensors
Removal ProcedureRelieve the fuel system pressure. Refer toFuel Pressure Relief.Raise and suitably support the vehicle. Refer toLifting and Jacking the Vehicle.Disconnect the body wiring harness electricalconnector-(1) from the fuel pressuresensor-(2).Wrap a shop towel around the fuel pressure senso ...