Chevrolet Equinox Service Manual: Inspection/Maintenance System Check

Chevrolet Equinox Service Manual / Vehicle - General / Inspection/Maintenance System Check

Refer to the appropriate diagnostic procedure below for the vehicle being serviced.

Inspection/Maintenance System Check– 2.2L or 2.4L engineInspection/Maintenance System Check– 2.8L, 3.0L, 3.2L, or 3.6L engine

Lifting and Jacking the Vehicle

.._-rDanger:To avoid any vehicle damage, serious personal injury or deathwhen major components are removed from the vehicle and the vehicleis supported by a hoist, support the vehicle with jack stands ...

Center Pillar Outer Panel Reinforcement Replacement

Removal ProcedureDisable the SIR System. Refer toSIR Disabling and Enabling.Disconnect the negative battery cable. Refer toBattery Negative Cable Disconnection and Connection.Warning:Refer toApproved ...

Other materials:

Balance Shaft Removal Engine Block Cylinder Block Balance Shaft
Note:This procedure is not used in Europe.Special Tools EN-43650 Balancer Shaft Bearing Remover and InstallerFor equivalent regional tools, refer toSpecial Tools.Remove the balance shaft bearing carrier bolts.Note:It is possible to install the intake side balance shaft into the exhaust side andvice ...