Chevrolet Equinox manuals

Tesla Model S (2012-2023) Owner's Manual: Using Sentry Mode

When Sentry Mode is turned on, the cameras and sensors remain powered on and ready to record suspicious activity around your vehicle when Model S is locked and in Park.

To store and retrieve Sentry Mode footage, ensure that Dashcam is on and a properly formatted USB flash drive is inserted into a front USB port (preferably in the glovebox) (see Using Dashcam).

If you want Sentry Mode to automatically turn on every time you leave your vehicle, touch Controls > Sentry Mode > On. There are three additional settings for customization:

NOTE: To set up your Home location, touch Navigate and hold down Home, then enter your address. Touch Save as Home.

NOTE: To recognize a location listed as Home, Work, or a Favorite, Model S must be parked within 32 feet (10 meters) of the saved location.

NOTE: Sentry Mode will not record video when Dashcam is OFF.

To manually turn Sentry Mode on or off for the current drive cycle, touch Controls > Sentry.

Manually turning Sentry Mode on or off using the touchscreen or the mobile app overrides your Home, Work, or Favorite exclusion preferences until the next time you drive.

Alternatively, you can use voice commands or the Tesla mobile app. To enable Sentry Mode using voice commands, say "Keep Tesla safe," "Keep my car safe," "Sentry on," or "Enable Sentry" (see Voice Commands).

Sentry Mode requires your Battery to be at least 20% charged. If the Battery falls below 20%, Sentry Mode turns off and the mobile app sends you a notification. Power consumption may increase when Sentry Mode is active.

NOTE: Software updates cannot be installed when Sentry Mode is turned on.

CAUTION: Do not rely on Sentry Mode to protect Model S from all possible security threats. While it may help deter some threats, no security system can prevent all attacks.

To view Sentry Mode footage, see Viewing Video Recordings.

Standby, Alert, and Alarm States

While in Sentry Mode, Model S may shift through three states as a response to its surroundings-Standby, Alert, and Alarm:

To silence the security alarm and audio system when the Alarm state is triggered, navigate to Controls > Safety > Disable Sentry Sounds. When enabled, the Alarm state still sends a notification through the mobile app and saves the last 10 minutes footage.

CAUTION: Sentry Mode may not activate the security alarm in all situations involving damage to the vehicle. Sentry Mode uses many factors to determine whether to activate the security alarm-all impacts may not be detected and the alarm may not activate in all situations.

NOTE: When the internal storage reaches full capacity, new recordings from Alert and Alarm events overwrite the older recordings.

Using Dashcam
Dashcam records footage of your vehicle's surroundings when the touchscreen is powered on (see Starting and Powering Off). Dashcam does not record video when your vehicle is powered off. Use Dashca ...

Sentry Mode - View Live Camera
NOTE: View Live Camera requires premium connectivity. It also requires that version 4.2.1 (or newer) of the Tesla mobile app is installed on a phone that has been paired as a key to Model S. When S ...

Other materials:

Camshaft Position Actuator Installation - Right Side Exhaust Valvetrain Camshaft
Ensure the proper camshaft position actuator is installed.Observe the body of the camshaft position actuator for the“EX” marking-(1). The marking is foran exhaust camshaft position actuator.Ensure the proper timing mark is used. Observe the outer ringof the camshaft position actuator for the tri ...

© 2017-2023 Copyright