Chevrolet Equinox Owners Manual: Traction Control System (TCS)/StabiliTrak Light
his light comes on briefly when the engine is started.
If the light does not come on, have the vehicle serviced by your dealer.
If the system is working normally, the indicator light turns off.
If the light is on and not flashing, the TCS and potentially the StabiliTrak system have been disabled.
A Driver Information Center (DIC) message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service.
If the light is on and flashing, the TCS and/or the StabiliTrak system is actively working.
See Traction Control/Electronic Stability Control.
StabiliTrak OFF Light
This light comes on briefly while
starting the vehicle. If it does not,
have the vehicle serviced by your
dealer.
This light comes on when the
StabiliTrak system is turned off.
If StabiliT ...
Wait-to-Start Light
For diesel engines, the wait-to-start
light shows that the engine is
functioning properly and indicates
when the engine can be started.
The fast warm-up glow plug system
makes the wait-to-s ...
Other materials:
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake Engine Control Engine Control Sensors Crankshaft/Camshaft/TDC Position Sensor
Camshaft Position Sensor Replacement - Bank 1 (Right Side) IntakeCalloutComponent NamePreliminary ProcedureRemove the air cleaner outlet duct. Refer toAir Cleaner Outlet Duct Replacement.1Camshaft Position Sensor FastenerCaution:Refer toFastener Caution.Tighten10-Y(89-lb-in)2Camshaft Position Sensor ...
