Manual Liftgate Operation
Unlock the vehicle before opening the liftgate.
To open the liftgate, press the touch pad under the liftgate handle and lift up.
Do not press the touch pad while closing the liftgate. This may cause the liftgate to be unlatched.
Power Liftgate Operation
On vehicles with a power liftgate, the vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves.
Choose the power liftgate mode by turning the dial on the switch to either the 3/4 or MAX position.
Pressto open or close the
liftgate.
Hands-Free Liftgate
The liftgate will not operate if the RKE transmitter is not within 1 m (3 ft).
To operate, kick your foot straight up in one swift motion under rear bumper between the left exhaust pipe and the license plate, then pull it back.
See Liftgate.
Ignition and Start Switch Housing Replacement Ignition System
Ignition and Start Switch Housing ReplacementCalloutComponent NamePreliminary ProceduresRemove the theft deterrent module. Refer toTheft Deterrent Module Replacement.Remove the turn signal switch bracket. Refer toTurn Signal Switch Bracket Replacement.Disconnect the ignition and start switch electri ...