Preliminary ProceduresRelieve the fuel system pressure. Refer toFuel Pressure Relief.Remove the intake manifold. Refer toIntake Manifold Replacement. | |
1 | Fuel Pressure Sensor Caution:Refer toFastener Caution. Procedure Disconnect the electrical connector. Tighten32-Y(24-lb-ft) |
Checking and Adding Power Steering Fluid Hydraulic Steering
Run the engine until the power steering fluid reaches about80°C (170°F).Turn the engine OFF.If the power steering fluid reservoir is covered by a shieldor a cover, remove the shield or the cover, as applicable.Clean the power steering fluid reservoir and the reservoircap.Remove the reservoir cap.N ...