Front Seat Mounting Bolt | 45-Y | 33-lb-ft |
Front Seat Adjuster Handle Screw | 2-Y | 18-lb-in |
Front Seat Inner Recliner Finish Cover Side Screw | 5Y | 44-lb-in |
Front Seat Cushion Frame Bolt | 12-Y | 9-lb-ft |
Rear Seat Back Cushion Latch Screw | 2.5-Y | 22-lb-in |
Rear Seat Mounting Bolt Front | 25-Y | 18-lb-ft |
Rear Seat Mounting Bolt Rear | 45-Y | 33-lb-ft |
Rear Seat Pivot Bolt | 45-Y | 33-lb-ft |
Rear Seat Armrest | 9-Y | 80-lb-in |
Rear Seat Adjuster Bolt | 90-Y | 66-lb-ft |
Rear Seat Adjuster Nut | 75-Y | 55-lb-ft |
Rear Seat Cushion Frame | 50-Y | 37-lb-ft |
Rear Seat Back Cushion Latch Release Handle | 2.5-Y | 22-lb-ft |
Rear Seat Recliner | 50-Y | 37-lb-ft |
Differential Pinion Input Shaft Runout Measurement
Special ToolsGE-7872Magnetic Base Dial Indicator Set, or equivalentNote:This measurement procedure is intended to measure drive axlepinion input shaft runout for systems with a constant velocity (CV)joint, rubber coupling or bolt-on U-joint yoke at the driveaxlePlace the transmission in NEUTRAL.Rais ...