Accelerator Control Pedal Bolts | 8-Y | 71-lb-in |
Air Cleaner Inlet Duct Fasteners (LAU) | 9-Y | 80-lb-in |
Air Cleaner Outlet Duct Clamp | 4-Y | 35-lb-in |
Air Cleaner Outlet Duct Fastener (LFW) | 10-Y | 89-lb-in |
Air Cleaner Outlet Duct to Turbo Fastener | 5-Y | 44-lb-in |
Boost Control Solenoid Nut | 8-Y | 71-lb-in |
Bypass Valve Actuator Mounting Bolt | 25-Y | 18-lb-ft |
Camshaft Position-(CMP) Sensor Bolt | 10-Y | 89-lb-in |
Camshaft Position Actuator Solenoid Valve Bolt | 10-Y | 89-lb-in |
Crankshaft Position-(CKP) Sensor Bolt | 10-Y | 89-lb-in |
Engine Coolant Temperature-(ECT) Sensor | 20-Y | 15-lb-ft |
Engine Mount Strut Bolt/Nut | 48-Y | 35-lb-ft |
Evaporative Emission Canister Purge Solenoid Valve Bolt | 10-Y | 89-lb-in |
EVAP Solenoid Vent Valve Bracket Bolt | 10-Y | 89-lb-in |
Exhaust Gas Recirculation-(EGR) Valve Adapter Bolt and Stud | 50-Y | 37-lb-ft |
Exhaust Gas Recirculation-(EGR) Valve Intake Pipe to Exhaust Manifold Bolt | 30-Y | 22-lb-ft |
Exhaust Gas Recirculation-(EGR) Valve Outlet Pipe to Adapter Nut | 30-Y | 22-lb-ft |
Exhaust Gas Recirculation-(EGR) Valve Outlet Pipe to Intake Manifold Bolt | 30-Y | 22-lb-ft |
Exhaust Gas Recirculation-(EGR) Valve Nut | 30-Y | 22-lb-ft |
Fuel Feed Intermediate Pipe Fittings | ||
First Pass | 15-Y | 11-lb-ft |
Second Pass | 30-Y | 22-lb-ft |
Fuel Injection Fuel Rail Fuel Pressure Sensor | 33-Y | 24-lb-ft |
Fuel Pipe Shield Bolt | 10-Y | 89-lb-in |
Fuel Filler Pipe Screw to the Fuel Filler Pipe | 2.5-Y | 22-lb-in |
Fuel Rail Hold-Down Bolt/Nut | 25-Y | 18-lb-ft |
Fuel Rail Hold-Down Stud | 25-Y | 18-lb-ft |
Fuel Tank Filler Pipe Hose Clamp | 4-Y | 35-lb-in |
Fuel Tank Filler Pipe Screw | 13-Y | 115-lb-in |
Fuel Tank Strap Fastener | 45-Y | 33-lb-ft |
Heat Shield Fastener | 9-Y | 80-lb-in |
Heat Shield Fastener | 58-Y | 43-lb-ft |
High Pressure Fuel Pump Retaining Bolt | 15-Y | 11-lb-ft |
Heated Oxygen Sensor (HO2S) | 42-Y | 31-lb-ft |
Idle Air Control-(IAC) Valve Screw | 3-Y | 27-lb-in |
Ignition Coil Bolt | 10-Y | 89-lb-in |
Ignition Coil to Ignition Control Module-(ICM) Screw | 4.5-Y | 40-lb-in |
Ignition Control Module-(ICM) Nut | 10-Y | 89-lb-in |
Ignition Control Module 14 Way Connector to Module Screw | 2.1-Y | 19-lb-in |
In-Line Fuel Filter Mounting Bracket Bolt | 20-Y | 15-lb-ft |
In-Line Fuel Filter Outlet Nut | 30-Y | 22-lb-ft |
Knock Sensor-(KS) | 23-Y | 17-lb-ft |
Knock Sensor-(KS) Heat Shield Bolt | 60-Y | 44-lb-ft |
Manifold Absolute Pressure-(MAP) Sensor Screw | 5-Y | 44-lb-in |
Powertrain Control Module-(PCM) Electrical Connector Bolt | 8-Y | 71-lb-in |
Spark Plug | 18-Y | 13-lb-ft |
Throttle Body Nut | 10-Y | 89-lb-in |
Throttle Body Support Bracket Bolt | 16-Y | 12-lb-ft |
Throttle Position-(TP) Sensor Screw | 2-Y | 18-lb-in |
Throttle Inlet Absolute Pressure (TIAP) Sensor | 4-Y | 35-lb-in |
Secondary Camshaft Drive Chain Shoe Installation - Right Side Valvetrain Camshaft
Ensure that the right secondary camshaft drive chainshoe-(1) is being installed.Position the right secondary camshaft drive chainshoe.Caution:Refer toFastener Caution.Install the secondary camshaft drive chain shoe bolt andtighten to25-Y(18-lb-ft). ...