Chevrolet Equinox Service Manual: Engine Coolant Thermostat Housing Removal Engine Cooling Thermostat

Chevrolet Equinox Service Manual / Powertrain / Engine / Engine Coolant Thermostat Housing Removal Engine Cooling Thermostat

Engine Coolant Thermostat Housing Removal Engine Cooling Thermostat

Remove the thermostat housing bolts.

Engine Coolant Thermostat Housing Removal Engine Cooling Thermostat

Remove the thermostat housing.

Engine Coolant Thermostat Housing Removal Engine Cooling Thermostat

Remove and discard the thermostat housing gasket.

Exhaust Manifold Removal (LAF, LEA, or LUK) Exhaust Exhaust Manifold

Remove the secondary air injection bolts-(2) andnuts-(1).Remove the secondary air injection studs-(3 and4).Remove the secondary air injection valveassembly-(1).Remove the secondary air injection gaske ...

Intake Manifold Disassemble Intake and Forced Induction Intake Manifold

Remove the throttle body bolts-(1).Remove the throttle body-(2).Remove and discard the throttle bodyseal-(3).Loosen the evaporative-(EVAP) solenoidbolt.Remove the EVAP solenoid-(1).Remove the manifold ...

Other materials:

Plastic Collar Quick Connect Fitting Service Engine Control
Removal ProcedureWarning:Refer toGasoline/Gasoline Vapors Warning.Note:There are several types of plastic collar fuel andevaporative emission quick connect fittings that may be used onthis vehicle.Bartholomew (1)Q release (2)Squeeze to release (3)Sliding retainer (4)Push down TI (5)Note:The followin ...