Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Crankshaft Position System Variation Learn Engine Block Cylinder Block Crankshaft

Chevrolet Equinox Service Manual / Powertrain / Engine / Crankshaft Position System Variation Learn Engine Block Cylinder Block Crankshaft

Note:The Crankshaft Position Variation Learn procedure is also required when the followingservice procedures have been performed, regardless of whether DTC-P0315 is set:

An engine replacementAn engine control module (ECM) or body control module (BCM) replacementA crankshaft balancer replacementA crankshaft removal and/or replacementA crankshaft position sensor disturbance/removal and/or replacementAny engine repairs which disturb the crankshaft to crankshaft position sensor relationship.

Note:The ECM monitors certain component signals to determine if all the conditions aremet to continue with the Crankshaft Position Variation Learn procedure.

Ignition ON, observe the DTC information with a scan tool. Verify no other DTCs areset, except DTCs-P0300–P0304, or P0315.If DTCs are set, except DTCs-P0300–P0304, or P0315, refer toDiagnostic Trouble Code (DTC) List - Vehiclefor further diagnosis.Select the Crankshaft Position Variation Learn Procedure with a scan tool and followthe on screen instructions:Verify DTC-P0315 does not set.If DTC-P0315 set, or another DTC is present refer toDiagnostic Trouble Code (DTC) List - Vehiclefor the applicable DTC that set.If the DTC does not setAll OK.
Crankshaft Position System Variation Learn Engine Block Cylinder Block Crankshaft
Note:The Crankshaft Position System Variation Learn procedure is also required when thefollowing service procedures have been performed, regardless of whether DTC-P0315is set:An engine replacementA en ...

Oil Pan Installation Engine Lubrication Oil Sump/Pan
Note:The lower crankcase surface must be free of contaminationprior to applying the sealer.Install and align the oil pan to block within20-minutes of applying the sealer.The oil pan must be fastened t ...

Other materials:

Lower Control Arm Replacement Control Arms Lower Control Arm
Special ToolsJ-42188-B -Ball Joint SeparatorFor regional equivalent tools, refer toSpecial Tools.Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assembly. Refer toTire and Wheel Removal and Installation.Remove and discard the lower co ...

© 2017-2024 Copyright www.cequinox.com