Chevrolet Equinox Service Manual: #13-00-89-006: Warranty Administration – Changes in Powertrain Warranty Coverage Effective with 2010 Model Year - (May 28, 2013)
| Subject: | Warranty Administration – Changes in Powertrain Warranty Coverage Effective with 2010Model Year |
|
| Models: | 2010-2014 GM Passenger Cars and Trucks | |
Following a competitive assessment, effective with the 2010 Model Year and beyond,General Motors made changes to the 5 year/100,000 mile (160,000 km) Extended PowertrainWarranty Coverage. This assessment both added and removed certain components fromthis coverage. A review of transactions shows that many of the components that wereremoved from this coverage have in many cases continued to be replaced under policyas the result ofconfusion over proper coverage. An examination of the Powertrain Coverage Tables inthe GM Labor Time Guide revealed that there were certain components that showed as“covered” in error. The Powertrain Coverage Tables will be updated in June 2013 toreflect the updated information.
As a general reminder, the following items were removed from Extended Powertrain coveragefor 2010 and later vehicles. Service Agents in the U.S. should refer to the latestversion of Bulletin Number 11-00-89-005 “Dealer Empowerment” for situations wherethe vehicle is out of warranty, and the dealer believes policy assistance would beappropriate. Service Agents in Canada should continue to refer to the Goodwill sectionon the WarrantyAdministration Homepage in GM Global Connect.
-
Components no longer included in the Extended Powertrain Warranty Coverage (2010-2014Model Years)
Throttle BodyPCMStarterIn Tank Fuel Pump (Gas)Fuel Injectors (Gas)Fuel Rail (Gas)Clutch & Pressure PlateTCMWheel Bearings – AllGM bulletins are intended for use by professional technicians,NOT a "do-it-yourselfer". They are written to inform thesetechnicians of conditions that may occur on some vehicles, or toprovide information that could assist in the proper service of avehicle. Properly trained technicians have the equipment,tools, safety instructions, and know-how to do a job properly andsafely. If a condition is described, DO NOT assume that thebulletin applies to your vehicle, or that your vehicle will havethat condition. See your GM dealer for information on whetheryour vehicle may benefit from the information. |
| WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION |
#PI0938: Powertrain and Various Electrical/Electronic Control Issues - (Mar 25, 2013)
Subject:Powertrain and Various Electrical/Electronic Control IssuesModels: 2007-2014 GM Passenger Cars and Light Duty Trucks Condition/ConcernThe following two labor codes is for claiming “Labor ...
Accessories
...
Other materials:
Transmission Fluid Drain and Fill Automatic Transmission Unit
Removal ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the fluid drain plug-(1).Drain transmission fluid into a suitable container.Caution:Refer toComponent Fastener Tightening Caution.Install the fluid drain plug-(1) and tighten to12-Y(106-lb-in).Installation ...
