Chevrolet Equinox Owners Manual: Tires

Chevrolet Equinox Owners Manual / Vehicle Care / Wheels and Tires / Tires

Every new GM vehicle has high-quality tires made by a leading tire manufacturer. See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.

Warning

Poorly maintained and improperly used tires are dangerous.
Overloading the tires can cause overheating as a result of too much flexing. There could be a blowout and a serious crash. See Vehicle Load Limits.
Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury.
Check all tires frequently to maintain the recommended pressure.
Tire pressure should be checked when the tires are cold.
Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact - such as when hitting a pothole.
Keep tires at the recommended pressure.
Worn or old tires can cause a crash. If the tread is badly worn, replace them.
Replace any tires that have been damaged by impacts with potholes, curbs, etc.
Improperly repaired tires can cause a crash. Only the dealer or an authorized tire service center should repair, replace, dismount, and mount the tires.
Do not spin the tires in excess of 56 km/h (35 mph) on slippery surfaces such as snow, mud, ice, etc. Excessive spinning may cause the tires to explode.

Wheels and Tires

...

All-Season Tires

This vehicle may come with all-season tires. These tires are designed to provide good overall performance on most road surfaces and weather conditions. Original equipment tires designed to GM' ...

Other materials:

Camshaft Position Actuator Solenoid Valve Replacement Valvetrain Camshaft
Camshaft Position Actuator Solenoid Valve ReplacementCalloutComponent NamePreliminary ProcedureRemove the intake manifold cover. Refer toIntake Manifold Cover Replacement1Fastener (Qty: 2)Caution:Refer toFastener CautionTighten10-Y(89-lb-in)2Camshaft Position Actuator Solenoid Valve ReplacementProce ...