Chevrolet Equinox Service Manual: Transmission General Specifications Automatic Transmission Unit
RPO Codes | 6T70–MH2, M7W-(2WD), MH4, M7U-(4WD) 6T75–MY9, M7V-(2WD), MH6, M7X-(4WD), 6T80–MHM-(2WD) |
Production Location | Warren Michigan (USA), Ramos, Mexico |
Transaxle Drive | Front Wheel Drive, All Wheel Drive |
Reverse Gear Ratio | 2.88 |
1st Gear Ratio | 4.484 |
2nd Gear Ratio | 2.872 |
3rd Gear Ratio | 1.842 |
4th Gear Ratio | 1.414 |
5th Gear Ratio | 1.000 |
6th Gear Ratio | 0.742 |
Effective Final Drive Gear Ratio | 2.77/3.16/3.39 |
Torque Converter Size– Diameter of Torque Converter Turbine | 246-mm |
Pressure Taps | Line Pressure |
Transaxle Fluid Type | DEXRON VI® |
Transaxle Fluid Capacity | 9.0-L/9.5-qts Quarts |
Transaxle Type: 6 | Six Forward Gears |
Transaxle Type: T | Transverse Mount |
Transaxle Type: 70/75/80 | Product Series |
Position Quadrant | P, R, N, D, * *(Refer to the applicable owner's manual) |
Case Material | Die Cast Aluminum |
Transaxle Net Weight | 104-kg |
Maximum Trailer Towing Capacity | N/A |
Maximum Gross Vehicle Weight (GVW) | 4,000-lbs |
Transmission General Specifications (6T40/6T45/6T50) Automatic Transmission Unit
Transmission General SpecificationsName6T40/6T45/6T50RPO CodesMH8, MH7, MHK, MHH, MHC, MHJ, MNH, MHBProduction LocationKorea/China/Mexico/ToledoTransmission DriveFront Wheel DriveReverse Gear Ratio2.9 ...
Transmission Rear Mount Bracket Replacement (AWD) Automatic Transmission Unit
Transmission Rear Mount Bracket ReplacementCalloutComponent NameDanger:To avoid any vehicle damage, serious personal injury or deathwhen major components are removed from the vehicle and the vehicleis ...
Other materials:
Fuel Injection Fuel Rail Fuel Pressure Sensor Replacement Engine Control Engine Control Sensors
Fuel Injection Fuel Rail Fuel Pressure Sensor ReplacementCalloutComponent NamePreliminary ProceduresRelieve the fuel system pressure. Refer toFuel Pressure Relief.Remove the intake manifold. Refer toIntake Manifold Replacement.1Fuel Pressure SensorCaution:Refer toFastener Caution.ProcedureDisconnect ...