Important:
Lubricant should be applied to form a thin, just visiblelayer, on the bead foot and bead outer areas. There should not beany visible clumps of lubricant.Never use soap or any lubricant net specifically designed fortire assembly.Lubricant is used to achieve accurate seating between thetire bead and the seat on the rim.Apply tire lubricant, refer toAdhesives, Fluids, Lubricants, and Sealersto both tire and wheelbeads for full circumference.Immediately assemble tire to wheel and inflate.If assembly is not completed within five (5) minutes of beinglubricated, both the tire and wheel must be re - lubricated forproper assembly and inflation.Cylinder Head Assemble (LAF, LEA, or LUK) Engine Block Cylinder Head
Special ToolsEN-8062Valve Spring CompressorEN-9666Valve Spring TesterEN-43963Valve Spring Compressor (off car)For equivalent regional tools, refer toSpecial Tools.Caution:In order to avoid damage, install the spark plugs after thecylinder head has been installed on the engine.Caution:Refer toCompone ...