Chevrolet Equinox Owners Manual: Protecting Exterior Bright Metal Moldings

Chevrolet Equinox Owners Manual / Vehicle Care / Appearance Care / Exterior Care / Protecting Exterior Bright Metal Moldings

Caution Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting.

This damage would not be covered by the vehicle warranty.

The bright metal moldings on the vehicle are aluminum, chrome, or stainless steel. To prevent damage always follow these cleaning instructions:

Be sure the molding is cool to the touch before applying any cleaning solution.
Use only approved cleaning solutions for aluminum, chrome, or stainless steel. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings.
Always dilute a concentrated cleaner according to the manufacturer's instructions.
Do not use cleaners that are not intended for automotive use.
Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish.

Finish Care

Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as ...

Cleaning Exterior Lamps/ Lenses, Emblems, Decals, and Stripes

Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals, and stripes. Follow instructions under "Washing the Vehicle" pr ...

Other materials:

Front Wheel Drive Intermediate Shaft Replacement Engine Block Cylinder Block Crankshaft
Special ToolsJ-2619–01Slide HammerJ-44467Output Shaft Assembly Remover andInstallerRemoval ProcedureRaise and support the vehicle. Refer toLifting and Jacking the VehicleRemove the wheel drive shaft assembly. Refer toFront Wheel Drive Shaft Replacement.Note:Remove the retaining ring. DO NOT re-use ...