Caution
The vehicle does not need an
elaborate break-in. But it will
perform better in the long run if
you follow these guidelines:
Following break-in, engine speed and load can be gradually increased. |
Ignition PositionsTire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting Wheel Hub
Note:After remounting a tire and wheel assembly to a hub/axleflange, remeasure the tire and wheel assembly on-vehicle runout inorder to verify that the amount of runout has been reduced andbrought to within tolerances.Mark the location of the high spot on the tire and wheelassembly as determined dur ...