Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Indicator/Warning Message Description and Operation Gauges

Chevrolet Equinox Service Manual / Body / Driver Info & Control / Indicator/Warning Message Description and Operation Gauges

INDICATOR LIGHT ON

Refer to the OWNER’S MANUAL for the descriptions and explanations of all indicatorlights.

For diagnosis and repair information related to an indicator light refer to the SystemDiagnosis and the Description of Operation that the message relates to.

MESSAGE DISPLAYED

Refer to the OWNER’S MANUAL for descriptions and explanations of all messages displayed.

For diagnosis and repair information related to a displayed message refer to the SystemDiagnosis and the Description of Operation that the message relates to.

CHANGE TIMING BELT MESSAGE

The Instrument Cluster monitors the odometer mileage to determine when timing belt(if equipped) replacement may be necessary. After the vehicle has accumulated approximately100,000 miles (160,000 kilometers), the Instrument Cluster may display the CHANGETIMING BELT message. After the engine timing belt has been replaced, reset the CHANGETIMING BELT message by locating and removing the fuses that supply power to the InstrumentClusterfor two minutes.

BRAKES OVERHEATED

The Electronic Brake Control Module monitors brake usage and compares it to an internalthermal model to determine if the brakes could become overheated. If the ElectronicBrake Control Module determines the brakes pads have exceeded a desirable temperaturebased on the thermal model, it sends a serial data message to the Instrument Clusterto display the BRAKES OVERHEATED message. The message remains displayed until theestimated temperaturereturns to a desirable range.

Universal Remote System Programming
If equipped, these buttons are in the overhead console.This system can replace up to three remote control transmitters used to activate devicessuch as garage door openers, security systems, and home a ...

Instrument Cluster Replacement (Terrain) Gauges
Instrument Cluster ReplacementCalloutComponent NamePreliminary ProcedureRemove the instrument panel cluster trim plate bezel. RefertoInstrument Panel Cluster Trim Plate Bezel Replacement.1Instrument P ...

Other materials:

Secondary Air Injection System Description Engine Control
The Secondary Air Injection System aids in the reduction of hydrocarbon exhaust emissionsduring a cold start. This occurs when the start-up engine coolant temperature (ECT)is between −10 to +56°C (14–133°F), the intake air temperature (IAT) is greater than−10°C (14°F) and it has been more ...

© 2017-2019 Copyright www.cequinox.com