Chevrolet Equinox Owners Manual: How to Reset the Engine Oil Life System

Chevrolet Equinox Owners Manual / Vehicle Care / Vehicle Checks / Engine Oil Life System / How to Reset the Engine Oil Life System

Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system:

Display REMAINING OIL LIFE on the DIC menu. See Driver Information Center (DIC).
Press and hold V for several seconds while the Oil Life display is active to reset the Oil Life system.
100% OIL LIFE will be displayed when the oil life system is successfully reset.

The oil life system can also be reset as follows:

Place the ignition in Service Mode. See Ignition Positions.
Display REMAINING OIL LIFE on the DIC menu. See Driver Information Center (DIC).
Fully press and release the accelerator pedal three times within five seconds.
If the display changes to 100%, the system is reset.

If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

When to Change Engine Oil

This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and mil ...

Automatic Transmission Fluid

How to Check Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the veh ...

Other materials:

Engine Front Cover Installation Engine Block Cylinder Block Cyl Block Front Cover
Special Tools EN–46109 Guide PinsFor equivalent regional tools, refer toSpecial Tools.Install the 8-mm (0.315-in) guide from the EN–46109 pins into the cylinder block positions as shown.Install the NEW engine front cover to cylinder block seal.Note:No RTV sealant should be visible in the M12 bol ...