Pressing on the RKE
transmitter a second time will
bypass the 30-second delay
and immediately arm the alarm
system.
The vehicle alarm system will not arm if the doors are locked with the key.
If the driver door is opened without
first unlocking with the RKE
transmitter, the horn will chirp and
the lights will flash to indicate
pre-alarm. If the vehicle is not
started, or the door is not unlocked
by pressing on the RKE
transmitter during the 10-second
pre-alarm, the alarm will be
activated.
If a door, the hood, or the liftgate is opened without first disarming the system, the turn signals will flash and the horn will sound for about 30 seconds. The alarm system will then re-arm to monitor for the next unauthorized event.
Front View Camera Module Calibration
The calibration procedure will start automatically after SPS programming is complete.During this time the Lane Departure Warning amber indicator will illuminate.CalibrationThe calibration process for the front view camera system is necessary when a frontview camera module is replaced by a new one. T ...