Chevrolet Equinox Service Manual: Windshield Wiper Arm Replacement (Terrain Passenger Side)
Preliminary Procedure Open and suitably support the hood assembly. | |
1 | Windshield Wiper Arm Nut Cap Procedure Use a small flat-bladed tool to disengage the nut cap from the windshield wiper arm. |
2 | Windshield Wiper Arm Nut Caution:Refer toFastener Caution. ProcedureCarefully rock the windshield wiper arm from the windshield wiper transmission pivotshaft.Clean the knurls on the pivot shaft with a soft wire brush.When installing the new wiper arm onto the pivot shaft, align the wiper blade withthe small line in the windshield lower blackout area.Hold the wiper arm in position while securing the wiper arm nut.Tighten28-Y (21-lb-ft) |
3 | Windshield Wiper Arm Assembly-Passenger Side Procedure Remove the windshield wiper blade. Refer toWindshield Wiper Blade Replacement. |
Windshield Side Garnish Molding Replacement Windshield
Windshield Side Garnish Molding ReplacementCalloutComponent NamePreliminary ProcedureDisable the SIR system. Refer toSIR Disabling and Enabling.1Windshield Side Garnish Molding AssemblyProcedureStarti ...
Other materials:
Throttle Body Assembly Replacement Engine Control Air Metering/Acceleration Throttle
Throttle Body Assembly ReplacementCalloutComponent NamePreliminary ProcedureRemove the intake manifold cover. Refer toIntake Manifold Cover Replacement.1Bolt (Qty: 4)Caution:Refer toFastener Caution.Tighten10-Y(89-lb-in)2Throttle BodyProcedureDisconnect the throttle body harness connector.Install a ...
