Preliminary ProceduresRemove the driver side wheelhouse liner. Refer toFront Wheelhouse Liner Replacement.Place a clean suitable drain pan under the windshield washersolvent container.Disconnect the windshield washer pump electricalconnector.Disconnect the windshield washer pump front hose.Disconnect the rear washer system pump hose.Disengage the washer pump from the washer container.Using two flat-bladed tools under the washer pump, pry upwardin order to remove the pump from the washer containergrommet. | |
1 | Rear Window Washer Pump Hose |
2 | Windshield Washer Pump Hose |
3 | Windshield Washer Pump Assembly Tip:Install a new grommet prior to installing a new windshieldwasher pump. |
Sun Load Temperature Sensor Replacement
Sun Load Temperature Sensor ReplacementCalloutComponent Name1Instrument Panel Accessory Trim PlateRefer toInstrument Panel Accessory Trim Plate Replacement.2Sun Load Temperature SensorProcedureDepress tabs to remove sensor from trim plate. ...