Chevrolet Equinox Service Manual: Wheel Alignment Specifications Wheels

Chevrolet Equinox Service Manual / Chassis / Wheels/Tires / Wheel Alignment Specifications Wheels

Alignment Condition: Full tank of fuel, no passengers and placed on flat level surface.

Wheel Alignment Specifications

RPO Restriction

Wheels

Caster

±-0.8°

Cross Caster

±-0.8°

Camber

±-0.8°

Cross Camber

±-0.8°

Total Toe

±-0.2°

Steering Wheel Angle

±-3.5°

Thrust Angle

±-0.3°

Left

Right

(Left − Right)

Left

Right

(Left − Right)

(Left + Right)

(Left − Right)/2

None	Front	2.7°	2.7°	0.0°	−0.5°	−0.5°	0.0°	0.2°	0.0°	—
None	Rear	—	—	—	−0.4°	−0.4°	—	0.1°	—	0.0°

Tire Terminology and Definitions Wheels

Air Pressure The amount of air inside the tire pressing outward on each square inch of the tire.Air pressure is expressed in kPa (kilopascal) or psi (pounds per square inch).Accessory Weight The combi ...

Tire and Wheel Balancing (Road Force Variation (RFV)) Wheels

ALL wheel/tire assemblies must have a RFV within spec beforebeing mounted on vehicle.Important:If a wheel/tire assembly is not within the RFV specificationafter match mounting, the tire must be return ...

Other materials:

Horns System Description and Operation Horn
System DescriptionThe horn system consists of the following components:HORN fuseUnderhood fuse block (contains PCB horn relay)Horn switchHorn-low noteHorn-high noteBody control module (BCM)K84Keyless Entry Control ModuleS33Horn SwitchK73Telematics Communication Interface Control ModuleK9Body Control ...