Chevrolet Equinox Service Manual: Water Pump Removal Engine Cooling Coolant Pump

Chevrolet Equinox Service Manual / Powertrain / Engine / Water Pump Removal Engine Cooling Coolant Pump

Water Pump Removal Engine Cooling Coolant Pump

Remove the engine coolant temperaturesensor-(1).

Water Pump Removal Engine Cooling Coolant Pump

Remove the thermostat and water feed pipe retainingbolts.

Note:Twist the water feed pipe while pulling to remove it from thewater pump cover.

Remove the thermostat housing and water feedpipe-(1) from the water pump cover.

Water Pump Removal Engine Cooling Coolant Pump

Remove the water pump retaining bolts. Be sure to remove thebolt that goes through the front of the engine block.Remove the water pump assembly-(1).

Engine Block Disassemble Engine Block

Remove the engine block coolant drain plug.Remove the oil flow check valve.Remove the rear oil passage plugs-(3).Remove the 3 oil passage plugs on each side of theblock-(2).Remove the 2 water passage ...

Engine Block Disassemble Engine Block

Remove the engine front cover studs-(1).Remove the block heater cartridge, if equipped.Remove the right knock sensor bolt.Remove the right knock sensor.Remove the left knock sensor bolt.Remove the lef ...

Other materials:

Vehicle Load Limits
It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on the vehicle may show how much weight it may properly carry, the Tire a ...