Preliminary Procedure Remove the water pump and balancer shaft chain. Refer toWater Pump and Balance Shaft Chain Replacement. | |
1 | Water Pump and Balance Shaft Chain Crankshaft Sprocket ProcedurePull the water pump and balance shaft chain crankshaft sprocket from the crankshaft.For installation align the crankshaft sprocket key with the slot in the water pumpand balance shaft chain crankshaft sprocket. Slide the gear into place.Note:The crankshaft sprocket key is only placed in the recess of the crankshaft. Takecare that it does not fall into the oil pan. |
Transmission Internal Mode Switch Logic Transmission Control Transmission Control Sensors Transmission Range Switch
Transmission Internal Mode Switch LogicGear Selector PositionSignal ASignal BSignal CSignal PParkLOWHIHILOWPark/ReverseLOWLOWHILOWReverseLOWLOWHIHIReverse/NeutralHILOWHIHINeutralHILOWHILOWNeutral/Drive-6HILOWLOWLOWDrive-6HILOWLOWHIDrive-6/Drive-4LOWLOWLOWHIDrive-4/MLOWLOWLOWLOWDrive-4/Drive-3LOWHILO ...