Note:
Do not stroke/cycle the stationary hydraulic lash adjusterplunger without oil in the lower pressure chamber.Do not allow the stationary hydraulic lash adjuster to tipover, plunger down, after the oil fill.Remove the valve lifters (SHLAs) from the cylinder head. Ifthe lifters are to be reused, keep in order so they can bereinstalled in the same position.
Engine Power Messages
ENGINE POWER IS REDUCED
This message displays when the
vehicle's propulsion power is
reduced. Reduced propulsion power
can affect the vehicle's ability to
accelerate. If this message is on,
but there is no observed reduction
in performance, proceed to your
destination. The performanc ...