Caution:Ensure each valve lifter is filled with clean engine oil andthe valve lifter does not tip over (plunger down) before theinstallation of the valve lifters. The loss of oil in the valvelifter lower pressure chamber or the dry stroking/cycling of thevalve lifter plunger will allow air to travel into the highpressure chamber of the valve lifter. Air in the high pressurechamber of the valve lifter may not be purged causing extensiveengine component damage.
Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Three types of sealer are commonly used in engines. These are RTV sealer, anaerobicgasket eliminator sealer, and pipe joint compound. The correct sealer and amount mustbe used in the proper location to prevent oil leaks. DO NOT interchange the 3-typesof sealers. Use only the specific sealer or the e ...