Chevrolet Equinox Owners Manual: Universal Remote System Programming
If equipped, these buttons are in the overhead console.
This system can replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. These instructions refer to a garage door opener, but can be used for other devices.
Do not use the Universal Remote system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982.
Read these instructions completely before programming the Universal Remote system. It may help to have another person assist with the programming process.
Keep the original hand-held transmitter for use in other vehicles as well as for future programming.
Erase the programming when vehicle ownership is terminated.
See "Erasing Universal Remote System Buttons" later in this section.
To program a garage door opener, park outside directly in line with and facing the garage door opener receiver. Clear all people and objects near the garage door.
Make sure the hand-held transmitter has a new battery for quick and accurate transmission of the radio-frequency signal.
Universal Remote System
See Radio Frequency Statement. ...
Programming the Universal
Remote System
For questions or help programming
the Universal Remote system, call
1-800-355-3515 or see
www.homelink.com.
Programming involves
time-sensitive actions, and may time
out causing the procedure ...
Other materials:
Water Pump and Balance Shaft Chain Replacement Engine Block Cylinder Block Balance Shaft
Removal ProcedureRemove the camshaft timing chain, sprocket, and tensioner. Refer toCamshaft Timing Chain, Sprocket, and Tensioner Replacement.Remove the adjustable balance shaft chain guide bolt and guideRemove the small balance shaft drive chain guide bolts and guide.Remove the upper balance shaft ...
