Using the Universal Remote System
Press and hold the appropriate Universal Remote system button for at least one-halfsecond. The indicator light will come on while the signal is being transmitted.
Erasing Universal Remote System ButtonsErase all programmed buttons when vehicle ownership is terminated.
To erase:
Press and hold the two outside buttons until the indicator light begins to flash.This should take about 10 seconds.Release both buttons.Reprogramming a Single Universal Remote System ButtonTo reprogram any of the system buttons:
Press and hold any one of the buttons. Do not release the button.The indicator light will begin to flash after 20 seconds. Without releasing the button,proceed with Step 1 under “Programming the Universal Remote System.”Front Side Door Garnish Molding Replacement Trim Panels/Welts
Front Side Door Garnish Molding ReplacementCalloutComponent NamePreliminary ProcedureRemove the front side door trim panel. Refer toFront Side Door Trim Panel Replacement.1Front Side Door Garnish Molding RetainerProcedureUse a door trim panel removal tool or equivalent to aid inthe removal of the re ...