Chevrolet Equinox Service Manual: Transmission Rear Mount Bracket Replacement (FWD) Automatic Transmission Unit
Danger:To avoid any vehicle damage, serious personal injury or deathwhen major components are removed from the vehicle and the vehicleis supported by a hoist, support the vehicle with jack stands atthe opposite end from which the components are being removed andstrap the vehicle to the hoist. Warning:Refer toSafety Glasses Warning. Preliminary ProcedureRaise and suitably support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the right front tire and wheel assembly. Refer toTire and Wheel Removal and InstallationRemove the rear mount. Refer toTransmission Rear Mount Replacement | |
1 | Transmission Rear Mount Bracket Fastener(Qty:-3) Caution:Refer toFastener Caution. Procedure Support the transmission. Tighten100-Y(74-lb-ft) |
2 | Transmission Rear Mount Bracket Fastener(Qty:-1) Tighten57-Y(42-lb-ft) |
3 | Transmission Rear Mount Bracket |
2-6 Clutch Piston Installation (6T40/45/50) Automatic Transmission Unit
2-6 Clutch Piston InstallationCalloutComponent Name12–6 Clutch Piston AssemblyNote:Position the 2–6 piston air bleed and large slot toward the top of the case.DT-47796 seal protector prevents the ...
Other materials:
Fuel Injector and Fuel Rail Replacement Engine Control
Special ToolsEN-47909 Fuel Injector Bore and Sleeve Cleaning KitEN-49248 Injector Rail Assembly RemoverFor equivalent regional tools, refer toSpecial Tools.Removal ProcedureRelieve the fuel system pressure. Refer toFuel Pressure Relief.Remove the fuel pipe shield. Refer toFuel Pipe Shield Replacemen ...
