Chevrolet Equinox manuals

Chevrolet Equinox Service Manual: Transmission Case Cleaning and Inspection Automatic Transmission Unit

Chevrolet Equinox Service Manual / Powertrain / Transmission/Transaxle / Transmission Case Cleaning and Inspection Automatic Transmission Unit

Transmission Case Cleaning and Inspection Automatic Transmission Unit

Transmission Case Cleaning and Inspection


Component Name

Caution:Do not use abrasive pads or bristle devices to clean thesealing surfaces. Abrasive pads produce a fine grit that can effecttransmission function. Abrasive pads can also remove enough metalto create oil leaks.

Caution:After cleaning the transmission components, allow to air dry.Do not use cloth or paper towels in order to dry any transmissioncomponents. Lint from the towels can cause componentfailure.

Caution:Do not reuse cleaning solvents. Previously used solvents maydeposit sediment which may damage the component.

Preliminary ProceduresThoroughly clean the transmission case assembly, including case threads, with cleansolvent.Clean gasket sealing surfaces. Remove all residual gasket material.Inspect all threaded holes. If necessary, repair any thread damage.


Case Cover Sealing Surface


Manual Shift Shaft Seal Surface

Note:Refer toManual Shift Shaft Seal Replacement.


Fluid Pressure Test Plug


Fluid Drain Plug


Control Valve Body Cover Sealing Surface


Torque Converter Housing Sealing Surface


Transmission Fluid Cooler Pipe Stud-M8-x-30.5 (Qty: 2)

Caution:Refer toFastener Caution.


12-Y (106-lb-in)


Transmission Case Cover Locator Pin


Inspect the locating pins to be fully seated in case.

Transfer Case Brace Replacement Automatic Transmission Unit
Transfer Case Brace ReplacementCalloutComponent NamePreliminary ProceduresRaise the vehicle. Refer toLifting and Jacking the Vehicle.Remove the right wheel drive shaft. Refer toFront Wheel Drive Shaft ...

Transmission Control Lever Knob Replacement Automatic Transmission Unit
Transmission Control Lever Knob ReplacementCalloutComponent Name1Shift Control KnobTip:Pull knob up off shift lever. Considerable effort may berequired to remove knob from shift control lever.Place sh ...

Other materials:

Reset Transmission Adapts Automatic Transmission Unit
The Reset Transmission Adapts is a procedure for automatictransmissions in which the shift pressure learn values of eachindividual clutch is reset to zero or a base calibrated value, inthe transmission control module-(TCM).Once the transmission adapts are set to zero or a calibratedvalue, the vehicl ...

© 2017-2022 Copyright