Chevrolet Equinox Owners Manual: Traction Control System (TCS)/StabiliTrak Light
his light comes on briefly when the engine is started.
If the light does not come on, have the vehicle serviced by your dealer.
If the system is working normally, the indicator light turns off.
If the light is on and not flashing, the TCS and potentially the StabiliTrak system have been disabled.
A Driver Information Center (DIC) message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service.
If the light is on and flashing, the TCS and/or the StabiliTrak system is actively working.
See Traction Control/Electronic Stability Control.
StabiliTrak OFF Light
This light comes on briefly while
starting the vehicle. If it does not,
have the vehicle serviced by your
dealer.
This light comes on when the
StabiliTrak system is turned off.
If StabiliT ...
Wait-to-Start Light
For diesel engines, the wait-to-start
light shows that the engine is
functioning properly and indicates
when the engine can be started.
The fast warm-up glow plug system
makes the wait-to-s ...
Other materials:
Secondary Camshaft Intermediate Drive Chain Installation - Left Side Valvetrain Camshaft
Special ToolsEN 48383Camshaft Retaining ToolsEN 48589Crankshaft Rotation SocketFor equivalent regional tools, refer toSpecial Tools.Note:There should be no need to rotate the camshaft more than10-degrees. Using the hex cast into the camshaft rotatethe camshaft in order to install theEN 48383tools.In ...
