Match mounting is required on any wheel/tire assembly notwithin RFV specification.
Important:If a wheel/tire assembly is not within the RFV specificationafter match mounting, the tire must be returned to the tiremanufacturer.
All wheel weights should be removed prior to matchmounting.Match mounting is required on any assembly where the RFVreadings are out of spec.Match mounting identified in the high spot of the tire andmatches it with the low spot on the rim.Marks must be aligned +/- 25mm PRIOR to inflation.
Tire Dismounting and Mounting (Tire Inflation) Wheels
Memory Steer Description WheelsClearcoat Repair Specifications - 3M Products Emblems/Decals/Paint
Clearcoat Repair Specifications - 3M ProductsPaint ConditionWet SandingScratch RefinementCompoundingRotary PolisherDual Action Orbital PolisherHand Glazing/ PolishingNew vehicle prep or fine wheel marks————Perfect-It 3000 Swirl Mark Remover P/N 06064Perfect-It Foam Polishing Pad P/N 05725/38 ...