Chevrolet Equinox Service Manual: Tire and Wheel Runout Specifications

Chevrolet Equinox Service Manual / Chassis / Wheels/Tires / Tire and Wheel Runout Specifications

Tire and Wheel Runout Specifications

Application

Specification

Metric

English

Tire and Wheel Assembly– Lateral and Radial
Off-Vehicle	1.27-mm	0.050-in
On-Vehicle	1.52-mm	0.060-in
Wheel, Aluminum
Lateral	0.762-mm	0.030-in
Radial	0.762-mm	0.030-in
Wheel, Steel
Lateral	1.143-mm	0.045-in
Radial	1.015-mm	0.040-in
Wheel Hub/Axle Flange– Guideline	0.132-mm	0.0052-in
Wheel Stud– Guideline	0.25-mm	0.010-in

Tire Pressure Monitor Operation Wheels

This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS is designedto warn the driver when a low tire pressure condition exists. TPMS sensors are mountedonto each tire and wheel assembly ...

Tire Pressure Monitor Description and Operation TPMS

Tire Pressure Monitoring Block DiagramA5Driver Information CenterP16Instrument ClusterK9Body Control ModuleK77Remote Control Door Lock ReceiverT10Keyless Entry AntennaB2LFTire Pressure Sensor - Left F ...

Other materials:

Propeller Shaft Description and Operation Driveshafts Propeller Shaft Assembly
The propeller shaft assembly is a 2-piece design.The front shaft consists of a plunging A-type constantvelocity joint at the front and a universal joint and yoke at therear.The rear shaft consists of a center bearing and a centeryoke, which are pressed onto the rear half of the propshaft andretained ...