
Example Label
A vehicle-specific Tire and Loading Information label is attached to the center pillar (B-pillar). The tire and loading information label shows the number of occupant seating positions (1), and the maximum vehicle capacity weight (2) in kilograms and pounds.
The Tire and Loading Information label also shows the size of the original equipment tires (3) and the recommended cold tire inflation pressures (4).
For more information on tires and inflation see Tires and Tire Pressure.
There is also important loading information on the vehicle Certification/Tire label. It may show the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for the front and rear axle. See "Certification/Tire Label" later in this section.
Vehicle Load Limits
"Steps for Determining Correct
Load Limit-Body Side Trim Panel Replacement - Left Side Trim Panels/Welts
Body Side Trim Panel Replacement - Left SideCalloutComponent NamePreliminary ProceduresMove the rear seat to the full forward position.Remove the rear compartment front carpet opening cover bypulling upward to disengage the integral hook and loopfasteners.Remove the rear end trim finish panel. Refer ...