Preliminary Procedure Open and support the liftgate assembly. | |
1 | Tail Lamp Access Hole Cover (Qty:-2) Tip:Use a small flat bladed tool to aid in the removal of theaccess hole covers. |
2 | Tail Lamp Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten2.5-Y(22-lb-in) |
3 | Tail Lamp Assembly ProcedurePull outward at the forward edge of the tail lamp assembly todisengage the upper locator pin and lower tab from the tail lamppocket.Disconnect the electrical connector.Remove the tail lamp assembly from the vehicle. |
Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire
(Not Punctured)
The kit includes:
Sealant Canister Inlet Valve
Sealant/Air Hose
Base of Sealant Canister
Tire Sealant Canister
On/Off Button
Slot on Top of Compressor
Pressure Deflation Button
Pressure Gauge
Power Plug
Air Only Hose
If a tire ...