Preliminary ProcedureRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the tire and wheel assemblies. Refer toTire and Wheel Removal and Installation.Remove the left side engine splash shield. Refer toEngine Splash Shield Replacement - Left Side.Disconnect the steering linkage outer tie rods from the steering knuckles. Refer toSteering Linkage Outer Tie Rod Inspection.Disconnect the stabilizer shaft links from the stabilizer shaft. Refer toStabilizer Shaft Link Replacement. | |
1 | Stabilizer Shaft ProcedureRemove the stabilizer shaft insulators. Refer toStabilizer Shaft Insulator Replacement.Remove the stabilizer shaft through the left wheel opening. |
Rear Axle Lubricant Level Inspection Axles Rear
Rear Axle Lubricant Level InspectionCalloutComponent NamePreliminary ProcedureRaise the vehicle. Refer toLifting and Jacking the Vehicle.1Rear Differential Fill PlugCaution:Refer toFastener Caution.Tip:The fluid level should be level with the bottom of thethreads of the fill hole.If the fluid level ...