Four-Way Power Seat
Seat Position HandleHeight Adjustment Control
To adjust the seat, if equipped:
Move the seat forward or rearward using the handle under the front of the seat cushion-(1).SeeSeat Adjustment.Raise or lower the entire seat by moving the control-(2) up or down.SeePower Seat Adjustment.
Eight-Way Power SeatTo adjust a power seat, if equipped:
Move the seat forward or rearward by sliding the control forward or rearward.Raise or lower the front part of the seat cushion by moving the front of the controlup or down.Raise or lower the entire seat by moving the rear of the control up or down.SeePower Seat Adjustment.
Lumbar AdjustmentEight-Way Power Seat Shown, Four-Way SimilarIf available, press and hold the front or rear of the switch to increase or decreaselumbar support. Release the switch when the seatback reaches the desired level oflumbar support.
SeeLumbar Adjustment.
Reclining SeatbacksManual Reclining Seatbacks
To recline a manual seatback:
Lift the lever.Move the seatback to the desired position, and then release the lever to lock theseatback in place.Push and pull on the seatback to make sure it is locked.To return the seatback to the upright position:
Lift the lever fully without applying pressure to the seatback, and the seatback willreturn to the upright position.Push and pull on the seatback to make sure it is locked.Power Reclining Seatbacks
To adjust a power seatback, if available:
Tilt the top of the control rearward to recline.Tilt the top of the control forward to raise.SeeReclining Seatbacks.
Torque Converter Housing with Fluid Pump Assembly Installation (6T40/6T45/6T50 Non Hybrid) Automatic Transmission Unit Transmission Oil Pump
Torque Converter Housing with Fluid Pump Assembly InstallationCalloutComponent Name1Fluid Pump Seal Assembly2Torque Converter Housing Gasket3Torque Converter (w/Fluid Pump) Housing AssemblyNote:Rotate the differential slightly in each direction using the rotating tool to alignthe Differential Pinion ...