Chevrolet Equinox Service Manual: Rear Side Door Trim Panel Replacement Trim Panels/Welts
Preliminary Procedure Remove the rear door accessory switch mount plate. Refer toRear Side Door Accessory Switch Mount Plate Replacement. | |
1 | Rear Side Door Inside Handle Bolt Cap Procedure Pull the handle back to remove the cap. Use a suitable toolto unsnap. |
2 | Rear Side Door Inside Handle Fastener Caution:Refer toFastener Caution. Tighten2.5-Y-(22-lb-in) |
3 | Rear Side Door Pull Handle Fastener(Qty:-2) Tighten3-Y-(27-lb-in) |
4 | Rear Side Door Trim Panel Assembly ProcedureUse a door trim panel removal tool or equivalent to aid inthe removal of the retainer.Pull upwards on the door lock retainer cable todisengage.Disconnect the electrical connectors. |
Rear Side Door Sill Trim Plate Replacement Trim Panels/Welts
Rear Side Door Sill Trim Plate ReplacementCalloutComponent Name1Rear Side Door Sill Trim Plate Assembly2Rear Side Door Sill Trim Plate Assembly Clip(Qty:-2)ProcedureUse a flat-bladed plastic trim tool ...
Instrument Carrier Replacement (Terrain) Consoles Center Console
Removal ProcedureRemove the instrument panel lower trim pad retainer assembly.Refer toLower Trim Pad Retainer Replacement.Remove the left and right air distributor outer ducts. RefertoAir Distributor ...
Other materials:
Engine Prelubing
Note:This procedure is not used in Europe.Special Tools EN-45299 Engine PreluberFor equivalent regional tools, refer toSpecial Tools.Note:A constant and continuous flow of clean engine oil is required in order to properlyprime the engine. Ensure an approved engine oil is used, as specified in the ow ...
