1 | Rear Side Door Accessory Switch Mount Plate ProcedureStarting at the rear of the accessory switch mount plate ,usea small flat bladed tool to release the accessory switch mountplate from the door trim.Disconnect the electrical connector.When replacing the accessory switch mount plate, transfer allnecessary components. |
Key with Integrated Transmitter Programming Immobilizer
Keys can be programming in various ways using the procedures outlined below. Usingthe Replacing Keys procedures will first erase all the known keys from the vehicle.Any existing keys and any new keys will then be programmed. This procedure shouldbe used any time a key is required to be unlearned or ...