Preliminary ProceduresRemove the rear bumper fascia. Refer toRear Bumper Fascia Replacement.Remove the rear bumper fascia molding. Refer toRear Bumper Fascia Molding Replacement. | |
1 | Rear Bumper Upper Fascia Screw (Qty:-2) Caution:Refer toFastener Caution. Tighten6-Y(53-lb-in) |
2 | Rear Bumper Upper Fascia ProcedureCarefully push a small nylon wedge between the upper fasciaand the lower fascia. Insert a small flat-bladed tool into thefascia slot and depress the snaps one at a time and pull on thefascia at the same time to gradually remove the lower fascia fromthe upper fascia.Transfer part as necessary. |
Engine Mechanical Specifications
Engine Mechanical SpecificationsApplicationSpecificationMetricEnglishGeneralEngine TypeV-6Displacement3.6-Liter220-cu-inRPOLFXVIN3Bore94-mm3.7008-inStroke85.6-mm3.37-inCompression Ratio11.5:1Firing Order 1-2-3-4-5-6Spark Plug Gap0.95–1.10-mm0.0375–0.0433-inBlockCrankshaft Main Bearing Bore Diame ...